Hughes 9502-1

The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications. 9502 comes in two piece modem/antenna package or one piece modem/antenna in a single outdoor unit to suit your installation needs. C1D2 compliance option is available for intrinsic safety requirement to operate in oil and gas industry.


  9502 One Piece BGAN M2M Features

  •   Integrated IP Watchdog to ensure “always-on” network
       connectivity. No manual intervention required to recover
       from an outage.
  •   Auto-on/auto-context activation automatically restores power
       and PDP connection to itself following loss ofpower and/or IP
  •   Remote control via SMS—remote management platform for
       command and control to the terminal using SMS, including
       configuration, debugging, and access to Web interface.
  •   Relay mode passes WAN IP address to the connected RTU
  •   Firmware upgrades over the air or local.
  •   C1D2 option available.
  Technical Specifications
  •   Dimension: 275 x 275 x 84mm
  •   Weight: 3.8kg
  •   Operating Temperature: -40 to +75°C. Relative humidity 95%
       at +40°C.
  •   Ingress Protection: IP66
  Power Consumption
  •   DC input voltage: +12 Vdc/+24 Vdc nominal
  •   Ultra-low power consumption Transmit: < 20 W, Narrow beam
       w/o transmit: 3 W, Idle (regional beam): < 1 W, Off (wake
       on packet): < 10 mW (@ 12 Vdc), Off (wake on packet): < 30
       mW (@ 24 Vdc), Off (GPIO control): 0 W
  •   Ethernet connection (RJ45)
  •   USB–Type B for connection to configuration PC
  •   RS-232 (DB9) to external NMEA 0183-based GNSS device
       (e.g., GLONASS receiver)
  What's in the box?
  •   Hughes 9502 one piece BGAN M2M Terminal
  •   Locking bar for padlock
  •   Mounting screws and washers
  Optional Accessories at additional cost
  •   Antenna basic fixed mount kit that includes pole, bracket,
       bubble level and azimuth elevation bracket. Can be fixed to
       vertical or horizontal surface. Applicable for both 9502 one
       piece and 9502 two piece antenna/ODU installation.
  •   Antenna azimuth elevation bracket if you have an existing
       1.6” or 2.0” diameter pole. Applicable for both 9502 one
       piece and 9502 two piece antenna/ODU installation.

Hughes 9502-1

Inmarsat BGAN M2M

Inmarsat Coverage

9502 User Guide

9502 Setup Guide


Home  |   Privacy Policy  |   Consumer Complaint Handling Policy  |   Terms & Conditions  |   Disclaimer  |   FAQs  |   Sitemap  |